CGWMM - 460 H060383 TUDOR GLOSS POLYSHADES

  • MSDS: CGWMM
  • Manufacturer: MINWAX CO
  • Product Name: 460 H060383 TUDOR GLOSS POLYSHADES
  • National Stock Number: 8010-00F055898
Product Identification

Product ID:460 H060383 TUDOR GLOSS POLYSHADES
MSDS Date:05/05/1995
FSC:8010
NIIN:00F055898
MSDS Number: CGWMM

Responsible Party
MINWAX CO
15 MERCEDES DRIVE
MONTVALE, NJ 07645-5000
US

Emergency Phone: 201-391-0253/201-818-7500

Info Phone: 201-818-7500/201-391-0253

Cage: EO256

Contractor
MINWAX COMPANY
UPPER SADDLE RIVER, NJ 07458 US

Telephone: 800-523-9299/216-566-2917

Cage: 0K1A4

Ingredients

KEROSENE (PETROLEUM), (C10-C15 SATURATED HYDROCARBONS 97%,

CAS: 64742-47-8

RTECS: OA5504000

Fraction By Weight: 27-33%


MEDIUM ALIPHATIC NAPHTHA (AROMATIC 100), PARAFFIN-NAPTHANES

CAS: 64742-88-7

Fraction By Weight: 14-19%

OSHA PEL 500 PPM

ACGIH TLV: 100 PPM


STODDARD SOLVENT (PETROLEUM DISTILLATE), MINERAL SPIRITS

CAS: 8052-41-3

RTECS: WJ8925000

Fraction By Weight: 0-1.5%

OSHA PEL 500 PPM

ACGIH TLV: 100 PPM

Hazards

Routes of Entry: Inhalation:NO Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:SKIN IRRITANT. INGESTION:
HARMFUL/FATAL IF SWALLOWED.
Explanation of Carcinogenicity:SEE INGREDIENTS.
Effects of Overexposure:IRRITATION

First Aid

First Aid:INHALATION: REMOVE TO FRESH AIR. SKIN: WASH THOROUGHLY W/SOAP
& WATER. EYES: FLUSH W/PLENTY OF WATER. INGESTION: DON'T INDUCE
VOMITING. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Fire Fighting

Flash Point Method:SCC
Flash Point:>101F
Extinguishing Media:WATER SPRAY, FOAM, DRY CHEMICAL/CO2. DON'T USE A
DIRECT STREAM OF WATER. PRODUCT MAY FLOAT/REIGNITE ON SURFACE OF
WATER.
Fire Fighting Procedures:WEAR SCBA & PROTECTIVE CLOTHING APPROPRIATE
FOR TYPICAL CHEMICAL FIRE. USE WATER SPRAY TO COOL FIRE EXPOSED
CONTAINERS.
Unusual Fire/Explosion Hazard:DON'T USE/STORE NEAR IGNITION SOURCES.
CONTAINERS EXPOSED TO INTENSE HEAT, SHOULD BE COOLED W/WATER TO
PREVENT VAPOR PRESSURE BUILDUP & CONTAINER RUPTURE.

Accidental Release

Spill Release Procedures:ABSORB W/SAND/OTHER SUITABLE ABSORBENT
MATERIAL & PLACE IN A CONTAINER FOR DISPOSAL. LARGE: AREA MAY BE
SLIPPERY. DIKE AROUND W/ABSORBENT MATERIAL. TRANSFER LIQUIDS &
CONTAMINATED DIKING MATERIAL SEPA RATE, SUITABLE CONTAINERS FOR
RECOVERY/DISPOSAL.

Handling

Handling and Storage Precautions:DON'T USE/STORE NEAR HEAT, SPARKS,
FLAME/OTHER SOURCES OF IGNITION. KEEP OUT OF REACH OF CHILDREN.
Other Precautions:DON'T TAKE INTERNALLY. AVOID CONTACT W/SKIN & EYES.
AVOID INHALATION.

Exposure Controls

Respiratory Protection:IF USING INDOORS, OPEN ALL WINDOWS & DOORS TO
MAKE SURE THERE IS FRESH AIR MOVEMENT.
Ventilation:USE ONLY W/ADEQUATE VENTILATION.
Protective Gloves:RUBBER
Eye Protection:SAFETY GLASSES
Supplemental Safety and Health

Chemical Properties

Spec Gravity:-0.834 TO 1.824
Solubility in Water:INSOLUBLE
Appearance and Odor:CLEAR, SLIGHTLY VISCOUS LIQUID W/CHARACTERISTIC
COLOR & HYDROCARBON ODOR

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:HEAT, SPARKS, OPEN FLAME, ALL SOURCES OF
HEAT & IGNITION
Hazardous Decomposition Products:HYDROCARBON FUMES, SMOKE, CO

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE &
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.